System Setup - Set Up Connection

Set Up

2700HG-D Gateway Setup Wizard

Set Up Connection Information

Select your time zone:

Time Zone

Select Connection Mode:

	PPP Mode
	Connection Type:
	Username:
	Password:
	Confirm Password:
	No Credentials Required:
	My ISP does not require a username and password

Addressing:
	DHCP
	Static
	IP Address:
	Unnumbered Mode
	Gateway IP Address:
	Subnet Mask:
VIP:
WARNING: Unchecking VIP will disable the ability to use devices on the LAN with dynamic IP addresses.

	RFC 1483 Mode
	Connection Type:
	Addressing:	Dynamic
		Static
IP Address:
Subnet Mask:
Default Gateway:
Host (Optional):
Domain (Optional):

DNS Server:		Automatically obtain DNS settings
		Specify DNS Server settings
Primary DNS:
Secondary DNS (Optional):
Domain Name (Optional):

	Transparent Bridging Mode
	WARNING: Transparent Bridging Mode causes the gateway's local IP address to get set as 192.168.0.1/255.255.255.0.If you want to connect to the gateway when it is in Transparent Bridging mode, you must change its configuration parameters with the following steps: Configure your computer's IP address to work on the same subnet (ex. 192.168.0.x, 255.255.255.0). Attach your computer to the local network port of the gateway Enter 192.168.0.1 as the address in a web browser. Note: When in Transparent Bridging Mode, NAT and the DHCP Server are disabled.